Exterior view of the Abresch timber yard

Wood

Elemental, sustainable and versatile: wood is one of the oldest materials of all and to this day the root of our passion. At Abresch, customers find sawn timber, composite panels and matching accessories – selected with experience and matched to the job in hand.

Sawn timber

We can supply you with sawn timber in various quality grades, thicknesses, lengths and finishes to suit your requirements. The large selection of clean and professionally dried wood is monitored in accordance with strict quality standards.

Formwork boards quality class II-IV

Formwork boards are used to make molds for producing concrete building elements.

24 mm form boards, mixed widths 8-16 cm / lengths from 3-5 m
24 mm boards in fixed widths 10 cm
24 mm boards in fixed widths 12 cm
24 mm boards in fixed widths 14 cm
24 mm boards in fixed widths 18 cm

Further widths available in 8, 16 and 20 cm.
The boards are rough sawn; if desired: dried, impregnated or planed.

Railing boards 30 x 150 mm board products

Railing boards standard, simple and low-cost design
Railing boards standard, stained red
Railing boards S10 graded and stamped, untreated
Railing boards S10 graded, stamped, dyed signal red

Squared timber stock cut class A/B - low-priced with possible 1/3 waney edge

6x12 cm
7x14 cm
8 x /10/12/16
10 x 10/12/16/20
12 x 14/16 cm

Squared timber stock cut class A/S - Square-edged or 1/8 wane

6 x 8 cm
8 x 10/12/16 cm
10 x 10/12/16/20 cm

Standard planking S7 45 x 280 mm / 3-5 m
Standard planking S7 45 x 280 mm edge-cut L = 3 and 4.50 m
Standard planking S7 45 x 280 mm edge-cut and mounted
Planking 50 x 280 mm / 3-5 m
Sheet piling 60 x 280 mm / 4.50 m
S10 planking 50 x 280 mm with stamp / 4-5 m
S10 planking 50 x 280 mm dyed signal red /4-5 m

24 x 48 mm rough/impregnated/kiln dried
30 x 50 mm rough/impregnated/kiln dried
40 x 60 mm rough/impregnated/kiln dried

In accordance with DIN 4074-1 and the rules of the Berufsgenossenschaft (statutory occupational accident insurance), technically dried slats/laths and eaves planks sorted according to their strength must be used to ensure the safety of roofers in construction.

Roof laths KD 31x52 mm / 4 + 5 m
Roof laths KD 41x62 mm / 4 + 5 m
Eaves planks KD 31.5 x 61.5 x 123 mm /5 m

The sawing of individually dimensioned timber is known as construction timber in fixed dimensions.

Strength sorting must be carried out for load bearing and construction purposes, whereby the minimum bending strength must not fall below the characteristic value of 24 N / mm2.

Further desired modifications such as planing, chamfering, impregnating, drying or edge-cutting must be specified.

Composite panels

Composite panels for a wide range of applications - Simple plywood panels for fences, OSB panels as step covering, film plywood as formwork panels for visible concrete surfaces or the higher quality three-layer panels for a concrete look with wood structure. You will find it all here.

Untreated plywood Elliottis pine C+/C available in 12 and 20 mm

Untreated plywood for universal use in the packaging industry or as blended board for subordinate non-visible formwork purposes. The panels are inexpensive, but sealed and sanded on at least one side.

Dimensions: 250 x 125 / 244 x 122

Untreated plywood maritime pine BFU 100

This more dimensionally stable solution for construction purposes involves improved untreated plywood panels, mostly of European origin with a 9-11-fold structure.

Dimensions: 250 x 125 / 244 x 122

Chinese film panels

Chinese film panels are the cheapest coated solution for formwork use on visible concrete surfaces without special requirements. This panel is made entirely of poplar, it is WPB bonded (weather and boil-proof), the phenolic resin coating on both sides is 125 - 200 g/m², the edges are sealed.

The panels are not made by recycling and are triple pressed.

The standard dimensions are 2.50 x 1.25 m. Better from a handling point of view and lighter are the centrally split and resealed 0.625 x 2.50 m panels.

Dimensions: 250 x 125 / 250 x 62.5 cm

Birch film panels:

High-quality birch formwork panel with 13-15 fold crosswise bonding for concrete surfaces.

Dimensions: 250 x 125 cm / 300 x 150 cm

Facing formwork 4 and 8 mm (Betoplan)

The thin 4 or 8 mm facing formwork is particularly suitable for installation on load-supporting elements, which eliminates the need to replace or repair damaged panel surfaces.

Dimensions: 250 x 125 cm

21 mm three-layer-panels

If a wood structure is desired in the concrete for wall and ceiling formwork, the classic, dimensionally stable 3-layer panel with melamine resin is available.

Theoretically the dimensions are 5 x 2 m, but the handier 0.50 x 2.00 / 2.50 m are more in demand.

Optionally with or without an edge protection profile.

OSB boards / large panels made of long and slender chips
Glued formaldehyde-free in accordance with DIN EN 300

Squared:

12 mm 280 x 125 cm
20 mm 250 x 125 cm

Tongue + groove:

250 x 62.5 cm
Available from warehouse in 12/15/18/22/25 cm

Solid wood boards with edge protection E-profile

The applications range from ceiling, wall and bridge formwork to worktops for interior and exterior use.

Dimensions: 50x150/200/250 cm

Accessories

The right accessories - to match our product range, we can also supply you with trapezoidal and triangular chamfer strips, hardwood wedges and stakes in various sizes.